Your Cart Preview ×

You have no items in your shopping cart.

Controlis Customer Support: 1300-781-861

  • Australia wide Delivery
  • 14 Day Returns
  • Genuine Product Guarantee
insteon

Micro Dimmer

More Views

Overview

Details

Quick Overview

  • The Micro Dimmer can be installed behind your existing switch with sense wires
  • Retain your decorative wall switches by connecting the sense wires
  • Settings are stored in non volatile memory so don’t worry about power failure
  • Customise various lighting dim settings easily and then control it from any INSTEON controller

Control Your Light Settings

The Micro Dimmer offers you up to 32 brightness and dim levels to choose from and also allows easy lighting dim control.

Enjoy Local Control

Ensure that you program the Micro Dimmer module for the specific type of switch that you have – latching switch, single momentary mode or dual momentary mode.  

Additional Information

Product Specifications

Electrical

Supply Voltage 100VAC to 240VAC (± 10%)
Frequency 50/60Hz auto-detected at power-up
Max. Load 10A, 3600W/240VAC resistive, 700W/240VAC inductive/capacitive, 2000W/240VAC bulbs
Load Types Resistive, Inductive/capacitive, Low voltage halogen
Surge Protection Over 1,000 Volts
Power Plug 2-pin Safety Shielded (Removable figure 8 power cable)
Retain all settings without power Yes, saved in non-volatile EEPROM
Standby Power Consumption < 1 watt
Battery Charge Hold Duration 9-12 months based on average 16 button presses per day (will decrease over time)
Recharging Jack Standard, Micro-USB, 5VDC
Recharging Time 1 hour
Battery Life 6 months (w/ 2 links @ 50 activations per day)
Safety Approved Approved for use in Australia and New Zealand

INSTEON

INSTEON Power line Mesh Repeater 0
INSTEON RF Mesh Repeater 0
INSTEON Controller 0
INSTEON Responder 0
Maximum Links 400
Frequency RF 921MHz ISM Band
Local on-level Adjustable from 32 fixed brightness levels or resume dim
Local ramp rate Adjustable from 0.1 second to 5 seconds locally (0.1 seconds to 8 minutes with software)
Scene Commands Supported On / Off, Fast on / Fast off, Begin brighten / End brighten, Begin dim / End dim
Status LED Red when heating, green when cooling, blinks red or green during setup
Local Control 0
Load Brightness Levels 32 locally (256 with software)
LED Brightness LED can be enabled or disabled locally or via software
INSTEON RF 0
Commands Supported as Controller On / Off
Commands Supported as Responder On / Off / Beep
Software Configurable 0
RF Range Up to 50 meters open air
X10 Support Yes (X10 address: any 1 of 256 - unassigned by default)

Product Information

Product Name INSTEON Micro Dimmer
Warranty 2 Years
In the Box INSTEON Micro Dimmer, Quick Start Guide
Product Code IN2442-522

Mechanical

Mounting Table top or wall mount
Casing UV stabalized plastic (INSTEON White)
Wire Connections Common 24V / Power 24V / Heat 1 / Heat 2 / Fan / Cooling 1 / Cooling 2
LED 1 RGB
LED During Use Green flash once (On, Bright, Fast On), Red flash once (Off, Dim, Fast Off)
Screw Clamp Connections Yes, 10 position
LED Battery Charge Indicator Built-in battery charge LED indicator
Power Switch For disabling buttons (“vacation” or “pocket” mode)
Set button 0
Sense Modes (Jumper on) Open = Group 1 On, Closed = Group 1 Off
Sense Modes (Jumper off) Open = Group 1 On (or off), Closed = Group 2 On (or Off)
Aux. Sensor Input Wire >= 20 gauge wire
Beep on button press Optional (off by default)
Stuck Button Mode Saves battery life by going to sleep if button stuck down
Beeper 0
Sensitivity Modes High (default) or Normal
Motion Detection Range Up to 110° arc, 12m
Motion Detector Sense Input Type PIR and photocell
Dimensions & Weight 46.6mm W x 17.5mm H x 46.6mm D - 72g
Operating Conditions Indoors, 0° C to 40° C, up to 90% relative humidity
insteon
Micro Dimmer
AU$ 89
Ships in 10-12 business days

The INSTEON Micro Dimmer module sports a compact design and is fitted behind your home’s lighting or electrical switches. Also known as sense wires they are controlled through a...

Availability: Backorder

+ -
Shop risk free with Controlis
  • 14 Day Returns
  • Australian Support
  • Fully Complaint Installers
  • 100% Secure encryption
Overview

Details

Quick Overview

  • The Micro Dimmer can be installed behind your existing switch with sense wires
  • Retain your decorative wall switches by connecting the sense wires
  • Settings are stored in non volatile memory so don’t worry about power failure
  • Customise various lighting dim settings easily and then control it from any INSTEON controller

Control Your Light Settings

The Micro Dimmer offers you up to 32 brightness and dim levels to choose from and also allows easy lighting dim control.

Enjoy Local Control

Ensure that you program the Micro Dimmer module for the specific type of switch that you have – latching switch, single momentary mode or dual momentary mode.  

Additional Information

Product Specifications

Electrical

Supply Voltage 100VAC to 240VAC (± 10%)
Frequency 50/60Hz auto-detected at power-up
Max. Load 10A, 3600W/240VAC resistive, 700W/240VAC inductive/capacitive, 2000W/240VAC bulbs
Load Types Resistive, Inductive/capacitive, Low voltage halogen
Surge Protection Over 1,000 Volts
Power Plug 2-pin Safety Shielded (Removable figure 8 power cable)
Retain all settings without power Yes, saved in non-volatile EEPROM
Standby Power Consumption < 1 watt
Battery Charge Hold Duration 9-12 months based on average 16 button presses per day (will decrease over time)
Recharging Jack Standard, Micro-USB, 5VDC
Recharging Time 1 hour
Battery Life 6 months (w/ 2 links @ 50 activations per day)
Safety Approved Approved for use in Australia and New Zealand

INSTEON

INSTEON Power line Mesh Repeater 0
INSTEON RF Mesh Repeater 0
INSTEON Controller 0
INSTEON Responder 0
Maximum Links 400
Frequency RF 921MHz ISM Band
Local on-level Adjustable from 32 fixed brightness levels or resume dim
Local ramp rate Adjustable from 0.1 second to 5 seconds locally (0.1 seconds to 8 minutes with software)
Scene Commands Supported On / Off, Fast on / Fast off, Begin brighten / End brighten, Begin dim / End dim
Status LED Red when heating, green when cooling, blinks red or green during setup
Local Control 0
Load Brightness Levels 32 locally (256 with software)
LED Brightness LED can be enabled or disabled locally or via software
INSTEON RF 0
Commands Supported as Controller On / Off
Commands Supported as Responder On / Off / Beep
Software Configurable 0
RF Range Up to 50 meters open air
X10 Support Yes (X10 address: any 1 of 256 - unassigned by default)

Product Information

Product Name INSTEON Micro Dimmer
Warranty 2 Years
In the Box INSTEON Micro Dimmer, Quick Start Guide
Product Code IN2442-522

Mechanical

Mounting Table top or wall mount
Casing UV stabalized plastic (INSTEON White)
Wire Connections Common 24V / Power 24V / Heat 1 / Heat 2 / Fan / Cooling 1 / Cooling 2
LED 1 RGB
LED During Use Green flash once (On, Bright, Fast On), Red flash once (Off, Dim, Fast Off)
Screw Clamp Connections Yes, 10 position
LED Battery Charge Indicator Built-in battery charge LED indicator
Power Switch For disabling buttons (“vacation” or “pocket” mode)
Set button 0
Sense Modes (Jumper on) Open = Group 1 On, Closed = Group 1 Off
Sense Modes (Jumper off) Open = Group 1 On (or off), Closed = Group 2 On (or Off)
Aux. Sensor Input Wire >= 20 gauge wire
Beep on button press Optional (off by default)
Stuck Button Mode Saves battery life by going to sleep if button stuck down
Beeper 0
Sensitivity Modes High (default) or Normal
Motion Detection Range Up to 110° arc, 12m
Motion Detector Sense Input Type PIR and photocell
Dimensions & Weight 46.6mm W x 17.5mm H x 46.6mm D - 72g
Operating Conditions Indoors, 0° C to 40° C, up to 90% relative humidity