Your Cart Preview ×

You have no items in your shopping cart.

Controlis Customer Support: 1300-781-861

  • Australia wide Delivery
  • 14 Day Returns
  • Genuine Product Guarantee
insteon

Micro Relay (On/Off)

More Views

Overview

Details

Quick Overview

  • The Micro Relay On/Off module can be installed behind your existing switch with sense wires
  • Enjoy INSTEON automation by installing the Micro Relay On/Off module as an in-line module in your fixture box
  • Easy appliance and lighting control
  • Sense wires allow you to maintain local control of the switch
  • All settings are stored in non-volatile memory which means that your settings are safe even if there is a power failure

INSTEON Dual Mesh Technology

The Micro Relay On/Off module is backed by Dual Mesh Technology, which allows you to retain your decorative or standard switches without adding any new switches at the same time ensuring easy remote controlling your lights.

Additional Information

Product Specifications

Electrical

Supply Voltage 100VAC to 240VAC (± 10%)
Frequency 50/60Hz auto-detected at power-up
Max. Load 10A, 3600W/240VAC resistive, 700W/240VAC inductive/capacitive, 2000W/240VAC bulbs
Load Types Resistive, Inductive/capacitive, Low voltage halogen
Surge Protection Over 1,000 Volts
Power Plug 2-pin Safety Shielded (Removable figure 8 power cable)
Retain all settings without power Yes, saved in non-volatile EEPROM
Standby Power Consumption < 1 watt
Battery Charge Hold Duration 9-12 months based on average 16 button presses per day (will decrease over time)
Recharging Jack Standard, Micro-USB, 5VDC
Recharging Time 1 hour
Battery Life 6 months (w/ 2 links @ 50 activations per day)
Safety Approved Approved for use in Australia and New Zealand

INSTEON

INSTEON Power line Mesh Repeater 0
INSTEON RF Mesh Repeater 0
INSTEON Controller 0
INSTEON Responder 0
Maximum Links 400
Frequency RF 921MHz ISM Band
Local on-level Adjustable from 32 fixed brightness levels or resume dim
Local ramp rate Adjustable from 0.1 second to 5 seconds locally (0.1 seconds to 8 minutes with software)
Scene Commands Supported On / Off, Fast on / Fast off, Begin brighten / End brighten, Begin dim / End dim
Status LED Red when heating, green when cooling, blinks red or green during setup
Local Control 0
Load Brightness Levels 32 locally (256 with software)
LED Brightness LED can be enabled or disabled locally or via software
INSTEON RF 0
Commands Supported as Controller On / Off
Commands Supported as Responder On / Off / Beep
Software Configurable 0
RF Range Up to 50 meters open air
X10 Support Yes (X10 address: any 1 of 256 - unassigned by default)

Product Information

Product Name INSTEON Micro Relay (On/Off)
Warranty 2 Years
In the Box INSTEON Micro Relay, Quick Start Guide
Product Code IN2443-522

Mechanical

Mounting Table top or wall mount
Casing UV stabalized plastic (INSTEON White)
Wire Connections Common 24V / Power 24V / Heat 1 / Heat 2 / Fan / Cooling 1 / Cooling 2
LED 1 RGB
LED During Use Green flash once (On, Bright, Fast On), Red flash once (Off, Dim, Fast Off)
Screw Clamp Connections Yes, 10 position
LED Battery Charge Indicator Built-in battery charge LED indicator
Power Switch For disabling buttons (“vacation” or “pocket” mode)
Set button 0
Sense Modes (Jumper on) Open = Group 1 On, Closed = Group 1 Off
Sense Modes (Jumper off) Open = Group 1 On (or off), Closed = Group 2 On (or Off)
Aux. Sensor Input Wire >= 20 gauge wire
Beep on button press Optional (off by default)
Stuck Button Mode Saves battery life by going to sleep if button stuck down
Beeper 0
Sensitivity Modes High (default) or Normal
Motion Detection Range Up to 110° arc, 12m
Motion Detector Sense Input Type PIR and photocell
Dimensions & Weight 46.6mm W x 17.5mm H x 46.6mm D - 72g
Operating Conditions Indoors, 0° C to 40° C, up to 90% relative humidity
insteon
Micro Relay (On/Off)
AU$ 89
Ships in 10-12 business days

The compact and stylish INSTEON Micro Relay On/Off module fits comfortably behind the wall behind your lighting and electrical switches. Enjoy remote controlling all your wired lights and appliances...

Availability: Backorder

+ -
Shop risk free with Controlis
  • 14 Day Returns
  • Australian Support
  • Fully Complaint Installers
  • 100% Secure encryption
Overview

Details

Quick Overview

  • The Micro Relay On/Off module can be installed behind your existing switch with sense wires
  • Enjoy INSTEON automation by installing the Micro Relay On/Off module as an in-line module in your fixture box
  • Easy appliance and lighting control
  • Sense wires allow you to maintain local control of the switch
  • All settings are stored in non-volatile memory which means that your settings are safe even if there is a power failure

INSTEON Dual Mesh Technology

The Micro Relay On/Off module is backed by Dual Mesh Technology, which allows you to retain your decorative or standard switches without adding any new switches at the same time ensuring easy remote controlling your lights.

Additional Information

Product Specifications

Electrical

Supply Voltage 100VAC to 240VAC (± 10%)
Frequency 50/60Hz auto-detected at power-up
Max. Load 10A, 3600W/240VAC resistive, 700W/240VAC inductive/capacitive, 2000W/240VAC bulbs
Load Types Resistive, Inductive/capacitive, Low voltage halogen
Surge Protection Over 1,000 Volts
Power Plug 2-pin Safety Shielded (Removable figure 8 power cable)
Retain all settings without power Yes, saved in non-volatile EEPROM
Standby Power Consumption < 1 watt
Battery Charge Hold Duration 9-12 months based on average 16 button presses per day (will decrease over time)
Recharging Jack Standard, Micro-USB, 5VDC
Recharging Time 1 hour
Battery Life 6 months (w/ 2 links @ 50 activations per day)
Safety Approved Approved for use in Australia and New Zealand

INSTEON

INSTEON Power line Mesh Repeater 0
INSTEON RF Mesh Repeater 0
INSTEON Controller 0
INSTEON Responder 0
Maximum Links 400
Frequency RF 921MHz ISM Band
Local on-level Adjustable from 32 fixed brightness levels or resume dim
Local ramp rate Adjustable from 0.1 second to 5 seconds locally (0.1 seconds to 8 minutes with software)
Scene Commands Supported On / Off, Fast on / Fast off, Begin brighten / End brighten, Begin dim / End dim
Status LED Red when heating, green when cooling, blinks red or green during setup
Local Control 0
Load Brightness Levels 32 locally (256 with software)
LED Brightness LED can be enabled or disabled locally or via software
INSTEON RF 0
Commands Supported as Controller On / Off
Commands Supported as Responder On / Off / Beep
Software Configurable 0
RF Range Up to 50 meters open air
X10 Support Yes (X10 address: any 1 of 256 - unassigned by default)

Product Information

Product Name INSTEON Micro Relay (On/Off)
Warranty 2 Years
In the Box INSTEON Micro Relay, Quick Start Guide
Product Code IN2443-522

Mechanical

Mounting Table top or wall mount
Casing UV stabalized plastic (INSTEON White)
Wire Connections Common 24V / Power 24V / Heat 1 / Heat 2 / Fan / Cooling 1 / Cooling 2
LED 1 RGB
LED During Use Green flash once (On, Bright, Fast On), Red flash once (Off, Dim, Fast Off)
Screw Clamp Connections Yes, 10 position
LED Battery Charge Indicator Built-in battery charge LED indicator
Power Switch For disabling buttons (“vacation” or “pocket” mode)
Set button 0
Sense Modes (Jumper on) Open = Group 1 On, Closed = Group 1 Off
Sense Modes (Jumper off) Open = Group 1 On (or off), Closed = Group 2 On (or Off)
Aux. Sensor Input Wire >= 20 gauge wire
Beep on button press Optional (off by default)
Stuck Button Mode Saves battery life by going to sleep if button stuck down
Beeper 0
Sensitivity Modes High (default) or Normal
Motion Detection Range Up to 110° arc, 12m
Motion Detector Sense Input Type PIR and photocell
Dimensions & Weight 46.6mm W x 17.5mm H x 46.6mm D - 72g
Operating Conditions Indoors, 0° C to 40° C, up to 90% relative humidity