Your Cart Preview ×

You have no items in your shopping cart.

Controlis Customer Support: 1300-781-861

  • Australia wide Delivery
  • 14 Day Returns
  • Genuine Product Guarantee
insteon

Wireless Thermostat

More Views

Overview

Details

About INSTEON Wireless Thermostat

Place a thermostat anywhere you want with the INSTEON Wireless Thermostat linked to your INSTEON Thermostat.

Put it in the master bedroom, in the kitchen, in the guest room--anywhere you want room-specific, customised tem- perature control. You can add up to two INSTEON Wireless Thermostats to your INSTEON Thermostat.

  • Use as an INSTEON temperature and/or humidity controller
  • Use as a wireless controller of the INSTEON Thermostat
  • Make the temperature comfortable in any room
  • Battery-powered with optional power supply connection
  • Award-winning INSTEON dual-mesh technology 
Additional Information

Product Specifications

Electrical

Supply Voltage 100VAC to 240VAC (± 10%)
Frequency 50/60Hz auto-detected at power-up
Max. Load 10A, 3600W/240VAC resistive, 700W/240VAC inductive/capacitive, 2000W/240VAC bulbs
Load Types Resistive, Inductive/capacitive, Low voltage halogen
Surge Protection Over 1,000 Volts
Power Plug 2-pin Safety Shielded (Removable figure 8 power cable)
Retain all settings without power Yes, saved in non-volatile EEPROM
Standby Power Consumption < 1 watt
Battery Charge Hold Duration 9-12 months based on average 16 button presses per day (will decrease over time)
Recharging Jack Standard, Micro-USB, 5VDC
Recharging Time 1 hour
Battery Life 6 months (w/ 2 links @ 50 activations per day)
Safety Approved Approved for use in Australia and New Zealand

INSTEON

INSTEON Power line Mesh Repeater 0
INSTEON RF Mesh Repeater 0
INSTEON Controller 0
INSTEON Responder 0
Maximum Links 400
Frequency RF 921MHz ISM Band
Local on-level Adjustable from 32 fixed brightness levels or resume dim
Local ramp rate Adjustable from 0.1 second to 5 seconds locally (0.1 seconds to 8 minutes with software)
Scene Commands Supported On / Off, Fast on / Fast off, Begin brighten / End brighten, Begin dim / End dim
Status LED Red when heating, green when cooling, blinks red or green during setup
Local Control 0
Load Brightness Levels 32 locally (256 with software)
LED Brightness LED can be enabled or disabled locally or via software
INSTEON RF 0
Commands Supported as Controller On / Off
Commands Supported as Responder On / Off / Beep
Software Configurable 0
RF Range Up to 50 meters open air
X10 Support Yes (X10 address: any 1 of 256 - unassigned by default)

Product Information

Product Name INSTEON Wireless Thermostat
Warranty 2 Years
In the Box INSTEON Wireless Thermostat, 2 x AA Batteries, Quick Start Guide
Product Code IN2732-532

Mechanical

Mounting Table top or wall mount
Casing UV stabalized plastic (INSTEON White)
Wire Connections Common 24V / Power 24V / Heat 1 / Heat 2 / Fan / Cooling 1 / Cooling 2
LED 1 RGB
LED During Use Green flash once (On, Bright, Fast On), Red flash once (Off, Dim, Fast Off)
Screw Clamp Connections Yes, 10 position
LED Battery Charge Indicator Built-in battery charge LED indicator
Power Switch For disabling buttons (“vacation” or “pocket” mode)
Set button 0
Sense Modes (Jumper on) Open = Group 1 On, Closed = Group 1 Off
Sense Modes (Jumper off) Open = Group 1 On (or off), Closed = Group 2 On (or Off)
Aux. Sensor Input Wire >= 20 gauge wire
Beep on button press Optional (off by default)
Stuck Button Mode Saves battery life by going to sleep if button stuck down
Beeper 0
Sensitivity Modes High (default) or Normal
Motion Detection Range Up to 110° arc, 12m
Motion Detector Sense Input Type PIR and photocell
Dimensions & Weight 145mm W x 87mm H x 28mm D - 249g
Operating Conditions Indoors, 0° C to 40° C, up to 90% relative humidity
insteon
Wireless Thermostat
AU$ 119
Ships in 10-12 business days

You can link up to two INSTEON Wireless Thermostats to an INSTEON Thermostat, allowing you to control the HVAC system from anywhere in the house. When linked to an INSTEON...

Availability: Backorder

+ -
Shop risk free with Controlis
  • 14 Day Returns
  • Australian Support
  • Fully Complaint Installers
  • 100% Secure encryption
Overview

Details

About INSTEON Wireless Thermostat

Place a thermostat anywhere you want with the INSTEON Wireless Thermostat linked to your INSTEON Thermostat.

Put it in the master bedroom, in the kitchen, in the guest room--anywhere you want room-specific, customised tem- perature control. You can add up to two INSTEON Wireless Thermostats to your INSTEON Thermostat.

  • Use as an INSTEON temperature and/or humidity controller
  • Use as a wireless controller of the INSTEON Thermostat
  • Make the temperature comfortable in any room
  • Battery-powered with optional power supply connection
  • Award-winning INSTEON dual-mesh technology 
Additional Information

Product Specifications

Electrical

Supply Voltage 100VAC to 240VAC (± 10%)
Frequency 50/60Hz auto-detected at power-up
Max. Load 10A, 3600W/240VAC resistive, 700W/240VAC inductive/capacitive, 2000W/240VAC bulbs
Load Types Resistive, Inductive/capacitive, Low voltage halogen
Surge Protection Over 1,000 Volts
Power Plug 2-pin Safety Shielded (Removable figure 8 power cable)
Retain all settings without power Yes, saved in non-volatile EEPROM
Standby Power Consumption < 1 watt
Battery Charge Hold Duration 9-12 months based on average 16 button presses per day (will decrease over time)
Recharging Jack Standard, Micro-USB, 5VDC
Recharging Time 1 hour
Battery Life 6 months (w/ 2 links @ 50 activations per day)
Safety Approved Approved for use in Australia and New Zealand

INSTEON

INSTEON Power line Mesh Repeater 0
INSTEON RF Mesh Repeater 0
INSTEON Controller 0
INSTEON Responder 0
Maximum Links 400
Frequency RF 921MHz ISM Band
Local on-level Adjustable from 32 fixed brightness levels or resume dim
Local ramp rate Adjustable from 0.1 second to 5 seconds locally (0.1 seconds to 8 minutes with software)
Scene Commands Supported On / Off, Fast on / Fast off, Begin brighten / End brighten, Begin dim / End dim
Status LED Red when heating, green when cooling, blinks red or green during setup
Local Control 0
Load Brightness Levels 32 locally (256 with software)
LED Brightness LED can be enabled or disabled locally or via software
INSTEON RF 0
Commands Supported as Controller On / Off
Commands Supported as Responder On / Off / Beep
Software Configurable 0
RF Range Up to 50 meters open air
X10 Support Yes (X10 address: any 1 of 256 - unassigned by default)

Product Information

Product Name INSTEON Wireless Thermostat
Warranty 2 Years
In the Box INSTEON Wireless Thermostat, 2 x AA Batteries, Quick Start Guide
Product Code IN2732-532

Mechanical

Mounting Table top or wall mount
Casing UV stabalized plastic (INSTEON White)
Wire Connections Common 24V / Power 24V / Heat 1 / Heat 2 / Fan / Cooling 1 / Cooling 2
LED 1 RGB
LED During Use Green flash once (On, Bright, Fast On), Red flash once (Off, Dim, Fast Off)
Screw Clamp Connections Yes, 10 position
LED Battery Charge Indicator Built-in battery charge LED indicator
Power Switch For disabling buttons (“vacation” or “pocket” mode)
Set button 0
Sense Modes (Jumper on) Open = Group 1 On, Closed = Group 1 Off
Sense Modes (Jumper off) Open = Group 1 On (or off), Closed = Group 2 On (or Off)
Aux. Sensor Input Wire >= 20 gauge wire
Beep on button press Optional (off by default)
Stuck Button Mode Saves battery life by going to sleep if button stuck down
Beeper 0
Sensitivity Modes High (default) or Normal
Motion Detection Range Up to 110° arc, 12m
Motion Detector Sense Input Type PIR and photocell
Dimensions & Weight 145mm W x 87mm H x 28mm D - 249g
Operating Conditions Indoors, 0° C to 40° C, up to 90% relative humidity